 
		             
		    
             
	                Multifunction devices electronic
Codix 54U
| 
 | 
 | 
 
                                         
                                        
Multifunction display with 4 dual functions.
The Codix 54U is a voltage supplied dual function counter with 4 functions in one device: Counter with 2 summing ranges, summing and time counter, summing and frequency counter, time counter with 2 time ranges. For fast and slow counting pulses, with 6-digit LED display for NPN, PNP input signals.| Mechanical | |
|---|---|
| Model | Dual-function device electronic | 
| Functions | Pulse counter Frequency display Tachometer without limitvalues Hour meters / timers Short-time meter Dual-function display | 
| Dimension 1 | 96 x 48 mm | 92 x 45 mm | 
| Protection level | IP65 | 
| Working temperature | -20 °C ... +65 °C | 
| Weight | 150 g | 
| Reset | electronic | 
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Power supply | 100...240 (± 10%) V AC 10...30 V DC | 
| Signal input | NPN PNP | 
                                                Powerful
                            - Fast counter and frequency input, input frequency max. 60 kHz
- Robust housing - IP65 protection
- Very bright LED display, 14 mm high, 6 digits
- Exact and highly accurate frequency measurement method (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are evaluated by a period measurement. Frequencies > 38 Hz are evaluated via a special gate time measurement. Despite a short gate time, a very high accuracy of < 0.1% is achieved. The measurement result is available after max. 50 ms.
- Short start-up time - Detects incoming pulses already after 16 ms after switching on the power supply => no pulse loss with simultaneous motor start
- Large keys (can also be operated with gloves)
- Programming
- Simple and uniform programming and operation through plain text programming.
- Access to programming also during operation with safety query
- Display switching by pressing the right button
 
- Individually adjustable scaling: Multiplication and division factor (0.0001 to 99.9999) to display the corresponding units in e.g. quantity in 1/10 liters and flow rate in l/min
- Separate factors for frequency and pulse counting
- AC or DC supply
- Inputs: As an alternative to the HTL inputs, devices with a 5 V DC input level are also available for use as a parallel display to the PLC
- Timer Specials: Time or hour meter with different start/stop measurements, time setting in hours, minutes or seconds, with decimal point resolutions up to 1/1000 programmable
 
                                 Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding. 
	                                                         
            	                 
            	                 
            	                 
                             
                            