General inquiries


Service & Contact


Service hours

Kuebler Inc.

Monday - Friday: 8.00 am to 4.30 pm ET

IO-Link - door opener for
Industry 4.0 / IIoT

Simple. Networked. Independent.
  • Encoders, wire-actuated encoders and LCD touch displays
  • Simple and fast commissioning
  • Direct communication from the controller to sensors
  • Suitable for all fieldbus applications
  • A door opener for industry 4.0
Your contact person

Suitable encoders, wire-actuated encoders and LCD touch displays for your application.

IO-Link is establishing itself more and more on the market - and the trend is rising. IO-Link is used today in machine tools, production lines, intralogistics and packaging machines. IO-Link stands for simplicity, cost reduction and as a starting point for implementing future Industry 4.0 concepts. IO-Link products from Kübler open up new possibilities for your application. Let us make your existing or new machines / plants future-proof. Our IO-Link experts will be happy to advise you.

Your advantages with IO-Link products from Kübler

Saving time and costs

IO-Link products are already noticeable during installation / commissioning. Thanks to the insensitive transmission of IO-Link communication, simple and unshielded cables are used for this purpose. Kübler products are connected using standardized M8 or M12 industrial connectors. For smart sensors the parameter data comes directly from the controller and therefore does not need to be parameterized manually. The result is a faster machine that is ready for operation.

Efficient production thanks to Smart Sensor Profile

Flexibly and quickly, users can optimize their machines or entire production to the needs / requirements during operation. This is possible with the Smart Sensor Profile from IO-Link. Thanks to pre-defined profile classes and the corresponding stored function blocks, exchanging a sensor or switching to another sensor technology of the same profile class or other adjustments in the measured values can be implemented quickly and easily.

Independently applicable

With the use of IO-Link, a decision is made in favor of a standardized and fieldbus-independent interface, which, as a point-to-point connection, enables direct communication from the controller down to the lowest level of automation. IO-Link masters can thus be used to network almost any fieldbus and control system via a large number of IO-Link devices.

Remote diagnosis and condition monitoring
Based on the process data of an IO-Link device delivered in plain text, a deep insight into the processes and applications can be created for the service technicians. As a result, repairs can be initiated in advance and new maintenance concepts established. It also has a positive effect on remote maintenance, as this is easier to organize through IO-Link communication.
Industry 4.0 / IIoT ready

Networked and intelligent products are a prerequisite for Industry 4.0. Kübler IO-Link products You are able to say: "Who am I? Where am I? How do I feel?". In addition to the classic measuring task and transmission of measured values, senosensors must also provide further functionalities for networking products and for collecting or transmitting additional information. With IO-Link the "Industry 4.0 / IIoT ready features" (Connectivity, Identification, Diagnostics, Adaptability) defined by Kübler are fully supported.
Learn more about Industry 4.0 / IIoT ready >

IO-Link products for your application


Magnetic single- and multiturn encoders with IO-Link interface

The Sendix M36 encoders with a size of 36 mm as shaft or hollow shaft variants are based on IO-Link Version 1.1 in accordance with IEC 61131-9 and are equipped with the Smart Sensor Profile in addition to the Kübler Standard Profile. The high degree of protection up to IP67 as well as the wide temperature range from -40°C to +85°C ensure reliable operation.


To the products

Draw-wire encoder up to 42.5 m measuring length with IO-Link interface
The new draw-wire encoders with IO-Link interface are a combination of robust draw-wire mechanics and reliable Kübler encoders from the Sendix M36 and Sendix M58 product families. Practical solutions such as the fixed and interchangeable mounting of the encoders on the wire-draw mechanism are further advantages of the Kübler wire-draw encoders. The whole thing is rounded off by the possibility of limit switches for position and speed.
To the products

LCD-Touch IO-Link display
The 573T IO-Link display (IO-Link version 1.1 according to IEC 61131-9) can display a maximum of 2 measured values simultaneously and can be used with 2 additional analog inputs in both single-channel and dual-channel operation. For two-channel operation, all arithmetic operations are available to display sum, difference, ratio or the product. Inputs and outputs are separately scalable.
To the 573T IO-Link

We are a member of the IO-Link Community!
Learn more >

VIDEOS


IO-Link encoders, draw-wire encoders and inclination sensors - English