Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Encoders Absolute singleturn
Sendix 3651
|
|
Product is discontinued
A new / comparable product is available for this product.
Suitable for the toughest environments. Encoders with E1 approval.
The absolute encoders Singleturn Sendix 3651 / 3671 with analog interface and magnetic sensors are particularly flexible due to their versatile interfaces and measuring ranges. A green and red LED as a reference point and error display facilitate both installation and error diagnosis. Protected to IP69k, shock-resistant and resistant to extreme temperature fluctuations, the Sendix are suitable for even the most demanding outdoor applications. These encoders are e1 approved by the Federal Motor Transport Authority (KBA).
| Mechanical | |
|---|---|
| Dimension | Ø 36 mm |
| Shaft type |
6 mm shaft, with flat surface 8 mm shaft, with flat surface 1/4 " shaft, with flat surface |
| Flange type |
Ø 36.00 mm |
| Working temperature | -40 °C ... +85 °C |
| Protection level |
IP67 IP69k |
| Connection types |
Axial cable Radial cable M12 connector axial M12 connector radial |
| Max. rotational speed |
6.000 min-1 |
| Weight | 200 g |
| Electrical | |
|---|---|
| Scanning | magnetic |
| Resolution max. |
12 bits singleturn |
| Power supply |
10...30 V DC 15...30 V DC |
| Interfaces |
Analog 0...5 V Analog 0...10 V Analog 4–20 mA |
- Contactless measuring system for a wear-free and durable application.
- Stable die-cast housing and protection up to IP69k for particular leak resistance.
- High shock and vibration resistance for particular resilience.
- Outer diameter of only 36 mm.
- The hollow shaft version accommodates a blind hollow shaft of up to 10 mm, which can be fastened individually - via torque brackets or stator coupling.
- 360° resolved into 4096 different positions.
- For use in 12 V or 24 V automotive wiring systems.
Accessories
Bellows coupling, ø 19 mm
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Variants – for shaft diameters d1/d2 in mm
06/06 – 08/08 – 10/06 – 10/08 – 10/10 – 12/10 – 12/12
| 8.0000.1102.XXXX |
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.Variants – for shaft diameters d1/d2 in mm
04/04 – 06/04 – 06/06 – 08/06
| 8.0000.1202.XXXX |
