Encoders Absolute multiturn
Sendix M3663R
|
|
Energy Harvesting Technology: Electronic multiturn encoders – extremely robust!
The absolute encoder Multiturn Sendix M3663R with SSI interface and magnetic sensor technology is based on Energy Harvesting Technology and is equipped without gears and without battery. Special features include an extremely robust design, very high protection, and high bearing load. A stainless steel version is available for maximum robustness and seawater resistance. This encoder provides a superior and durable performance in the harshest environments.
Mechanical | |
---|---|
Dimension | Ø 36 mm |
Shaft type |
6 mm shaft, with flat surface 8 mm shaft, with flat surface 10 mm shaft, with flat surface 1/4 " shaft, with flat surface |
Flange type |
Clamping flange Ø 42.00 mm |
Working temperature | -40 °C ... +85 °C |
Protection level |
IP66 IP67 IP69k |
Connection types |
Radial cable M12 connector radial |
Max. rotational speed |
4.000 min-1 |
Weight | 250 g |
Electrical | |
---|---|
Scanning | magnetic |
Resolution max. |
14 bits singleturn 24 bits multiturn |
Power supply |
10...30 V DC |
Interfaces |
SSI, binär SSI, gray |
- Sturdy bearing construction in Safety-Lockplus™ design for particularly high resistance.
- Extra large bearings.
- Mechanically protected shaft seal.
- Protection level IP66, IP67 and IP69k in one device.
- Wide temperature range -40°C ... +85°C.
- Without gear and without battery, thanks to the Energy Harvesting technology.
- Angular measurement deviation ±0,5°.
- Repeat accuracy ±0.2°.
- Short control cycles, clock frequency with SSI up to 2 MHz.
- Max. resolution 38 bit (14 bit ST + 24 bit MT).
Accessories
Bellows coupling
Bellows couplings provide cost-effective connection of the motor and encoder. They are also able to correct any angular errors between the drive and encoder. Compensating larger angle displacements.Bellows coupling (stainless steel).
8.0000.1102.XXXX |