Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Inclinometer
IN62
|
|
2 switching outputs: inclinometer for static applications.
The inclinometers in the IN62 series are used to detect 2-axis inclinations in the measuring range of ±85° or 1-axis inclinations of up to 360° via an acceleration measuring cell. Various parameters can be customized for individual requirements (e.g. via the PACTware software). Thanks to their high robustness, the inclinometers are also ideally suited for outdoor use.| Mechanical | |
|---|---|
| Dimension | 62,6 mm x 71,6 mm x 20 mm |
| Connection types |
M12 connector |
| Working temperature | -40 °C ... +85 °C |
| Protection level |
IP68 IP69k |
| Electrical | |
|---|---|
| Measuring range | 0°...360° / -85°...+85° |
| Accuracy | ≤0,05 % / ≤0,1 % |
| Interfaces |
PNP NPN |
| Power supply |
10...30 V DC |
Two freely parameterizable switching outputs/ranges (PNP/NPN)
- Simple setting of the required end position / ranges via integrated IO-Link interface.
- Two different switching ranges or redundant output of the same switching range possible
- Reset to factory setting
- Configuration of the switching outputs - NC or NO contact, switching range via input or current tilt angle.
- Switching the spirit level function on/off
- Filter settings
- LED display for operating status and FDT/IODD communication and for setting the center point position (spirit level function).
- Temperature range -40°C ... +85°C and protection class IP68 / IP69K.
- Protection against the influence of salt spray and rapid temperature changes.
