Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Tachometer without limitvalues electronic
Codix 542
|
|
Frequency display, tachometer in 1/min or 1/sec freely scalable.
The Codix 542 is a power-supplied frequency display / tachometer with 6-digit LED display for NPN, PNP input signals. 1/min or 1/sec display is freely scalable for fast and easy display of the frequencyslow counting pulses - with fast HRA (High Rate Accuracy) measuring system.
| Mechanical | |
|---|---|
| Model | electronic |
| Function |
Frequency display |
| Dimension 1 |
96 x 48 mm | 92 x 45 mm |
| Protection level |
IP65 |
| Working temperature | -20 °C ... +65 °C |
| Weight | 150 g |
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Power supply |
90...260 V AC 10...30 V DC |
| Signal input |
NPN PNP |
Powerful
- Very bright LED display, 14 mm digit height
- Fast counter input for input frequency of max. 60 kHz
- Robust housing / IP65 protection
- Exact and highly accurate frequency measurement method (HRA - High Rate Accuracy System) Frequencies up to 38 Hz are evaluated by a period measurement. Frequencies > 38 Hz are evaluated via a special gate time measurement. Despite a short gate time, a very high accuracy of < 0.1% is achieved. The measurement result is available after max. 50 ms.
- Large keys - can also be operated with gloves
- Simple and uniform programming and operation through plain text programming. Programmable decimal point, adjustable from 0.0 to 0.000 (determines the resolution)
- As an alternative to the HTL inputs, devices with 4 to 30 V DC input level available
- Individually adjustable scaling Multiplication and division factor (0.0001 to 99.9999) to display corresponding units in e.g. frequencies in Hz and speed in U/min
- Adjustable waiting time - until 0 is displayed
- Display in 1/min or 1/sec
- AC or DC supply with sensor power supply
- Optionally with output for standstill monitoring
