Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Inclinometer
IN51
|
|
For dynamic applications: Inclinometers for fast measurement results and high accuracy.
Sensor fusion from acceleration and rotation rate measuring cell (gyroscope) minimizes influences from vibrations and interference accelerations.| Mechanical | |
|---|---|
| Dimension | 44,5 mm x 42,5 mm x 20 mm |
| Connection types |
Axial cable M12 connector |
| Working temperature | -40 °C ... +85 °C |
| Protection level |
IP68 IP69k |
| Electrical | |
|---|---|
| Measuring range | 0°...360° / -85°...+85° |
| Accuracy | ±0,1 ... ±0,3° / ±0,1 ... ±0,7° |
| Interfaces |
Analog 0,1...4,9 V Analog 0.5–4.5 V Analog 0...5 V Analog 0...10 V Analog 4–20 mA |
| Power supply |
10...30 V DC 15...30 V DC |
Accessories
Teach adapter
Adjustment of the measuring range via teach adapterSetting the angle measuring range to clockwise:
- Move sensor to start position
- Press the Teach-GND button until the output < 4 mA / 0.1 V is switched (approx. 1 s)
- Move sensor to end position
- Press the Teach-GND button until the output is switched to 20 mA / 4.9 V (approx. 3 s)
Resetting the angle measuring range:
- Press the Teach-GND button until the output is switched to 12 mA (approx. 6 s)
- The angle measuring range is reset to 360°
| IS40 | 05.TX40.1 |
EMC shield terminal
For EMC-compliant installation of the encoder cable.- Mounting on top hat rail
- Shield diameter
8.0000.4G06.0312 (03-12 mm)
- Weight approx. 7.4 g
- Clamp (spring steel, galvanized)
- Foot (spring steel)
| 8.0000.4G06.0312 |
Teach adapter, 8-pin
For controlling the control inputs for the following functions:
- Reset to factory settings
- Center point of measurement
- Scaling of the analog measuring range (start/end position)
- Setting the sensor filter
| 8.0010.9000.0017 |
