Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Multifunction devices electronic
Codix 544
|
|
Multifunction counter – up to 3 functions in one device.
The Codix 544 is a power-supplied multifunction counter with 3 functions in one device: Pulse, position, frequency and speed display, time counter and short time meter for fast and slow counting pulses. With 6-digit LED display for NPN, PNP input signals.| Mechanical | |
|---|---|
| Model | Multifunction device electronic |
| Functions |
Pulse counter Frequency display Position displays without limit values Tachometer without limitvalues Hour meters / timers Short-time meter |
| Dimension 1 |
96 x 48 mm | 92 x 45 mm |
| Protection level |
IP65 |
| Working temperature | -20 °C ... +65 °C |
| Weight | 150 g |
| Reset |
electronic |
(1) Front panel size | Panel cut-out
| Electrical | |
|---|---|
| Power supply |
100...240 (± 10%) V AC 10...30 V DC |
| Signal input |
NPN PNP |
Powerful
- Fast counter and frequency input, input frequency max. 60 kHz
- Robust housing - IP65 protection
- Very bright LED display, 14 mm high, 6 digits
- Exact and highly accurate frequency measurement method (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are evaluated by a period measurement. Frequencies > 38 Hz are evaluated via a special gate time measurement. Despite a short gate time, a very high accuracy of < 0.1% is achieved. The measurement result is available after max. 50 ms.
- Short start-up time - Detects incoming pulses already after 16 ms after switching on the power supply => no pulse loss with simultaneous motor start
- Large keys (can also be operated with gloves)
- Program:
- Simple and uniform programming and operation through plain text programming
- Access to programming also during operation with safety query
- Individually adjustable scaling Multiplication and division factor (0.0001 to 99.9999) to display corresponding units in e.g. position in 1/10 mm and speed in rpm/
- 4 different counter input types for position display: counting direction, difference or addition mode, phase discriminator with single, double, or quadruple evaluation
- Frequency measurement (display in 1/min or 1/sec)
- Time counting: Pulse width or period duration measurement in hours, minutes or seconds, as well as real-time display
- AC or DC supply
- Inputs: As an alternative to the HTL inputs, devices with a 5 V DC input level are also available for use as a parallel display to the PLC
- Optional with output: 0 signal for position and counting, standstill monitoring at speed, 1 Hz pulse at
