Due to a technical problem, our website is only available to a limited extent. This also affects our download service area. We are already working on the solution and ask for your understanding.
Process controllers for standard signals electronic
573
|
Product is discontinued
This product is no longer available. We would be pleased to support you in the selection of a comparable product.
Multifunction 6 digit and 2 inputs, 573
2 separately scalable analog inputs, 2 limits or analog output, 3 display ranges.| Mechanical | |
|---|---|
| Model | electronic |
| Function |
Process controllers for standard signals |
| Mounting type |
Front panel size | Panel cut-out |
| Connection types |
Screw terminals |
| Working temperature | 0 °C ... +45 °C |
| Weight | 200 g |
| Electrical | |
|---|---|
| Power supply |
115/230 V AC 17...30 V DC |
| Signal input |
Analog ±10 V Analog 0...10 V Analog 0...20 mA Analog 4–20 mA |
| Signal output |
Analog ±10 V Analog 0...10 V Analog 0...20 mA Analog 4–20 mA RS232 RS485 2 x PNP |
Innovative
Compact and versatile
- 2 separate freely scalable analog inputs +/-10 V, 0 to 10 V and 0/4 to 20 mA, resolution 14 bits
- Tare function, the device can be set to 0 at any input voltage
- Programmable linearization With up to 16 reference points, input via keyboard or by means of the teach function
- mean value measurement programmable from 2 to 16 measuring cycles, for strongly fluctuating input signals
- Simple programming by entering the desired display value for a defined input signal
- Fast measuring rate of 25 ms per channel alternately
Compact and versatile
- Up to 3 display values in one device, display A, display B, calculated display of A and B
- AC and DC power supply in one device
- Simple plain text programming with only 2 buttons and separate tare or teach button
- Can be used as a simple process converter, process control unit (2 point controllers) or for complex measuring tasks in which 2 values are to be monitored, calculated or further processed in a higher-level control system.
- Mathematical linking of the measured values of input A and B. The result can also be multiplied, divided or added to an offset value to obtain the desired display value.
- Analog output 0/4 to 20 mA, +/-10 V or 0 to 10 V
- 2 fast PNP switching outputs, 50 ms, with switching hysteresis, step or drag preset
- Programmable display update
