General inquiries


Sales & Support


Service hours (CET)

Fritz Kübler GmbH

Monday - Thursday: 7.30 am to 5.00 pm
Friday: 7.30 am to 4.00 pm

Sendix 5878 Sendix 5878
Sendix 5878 Sendix 5878

Encoders Absolute singleturn

Sendix 5878

  • Particularly resistant
  • Reliable
  • Latest encoder profile
  • Dimension Ø 58 mm
  • 16 bits singleturn
  • Max 1/2" hollow shaft, blind hole
  • Max 15 mm hollow shaft, blind hole
PROFIBUS DP

For field bus communication: Encoders with PROFIBUS DP interface.

The absolute encoders Singleturn Sendix 5858 / 5878 with PROFIBUS DP interface and optical sensors are the right solution for all Profibus applications. Distributed over 360°, the maximum resolution is 16 bits. These encoders are available with blind hollow shafts up to 15 mm.

Mechanical
Dimension Ø 58 mm
Shaft type 3/8 " hollow shaft, blind hole
10 mm hollow shaft, blind hole
12 mm hollow shaft, blind hole
14 mm hollow shaft, blind hole
15 mm hollow shaft, blind hole
1/2 " hollow shaft, blind hole
Flange type Ø 58.00 mm
Ø 63.00 mm
Ø 65.00 mm
Working temperature -40 °C ... +80 °C
Protection level IP65
IP67
Connection types M12 connector radial
Terminal box
Max. rotational speed 9.000 min-1
Weight 530 g
Electrical
Scanning optical
Resolution max. 16 bits singleturn
Power supply 10...30 V DC
Interfaces PROFIBUS DP
Reliable
  • Proven use in applications with the highest demands such as wind power or mobile automation.
  • IP67 protection and a wide temperature range from -40°C to +80°C make it particularly suitable for outdoor use.
Flexible
  • Fast, simple, error-free connection thanks to variant with M12 plug.
  • Extensive programming possibilities by using the latest encoder profile.
Data sheet

Sendix 5858 / 5878 PROFIBUS

PDF ∼ 925,6 KB | 07.2024
DE
EN
FR
Operation Manual

Operating manual for encoders with ATEX 2/22

Multilingual: German, English, French, Italian, Spanish
PDF ∼ 3,6 MB | 05.2023

Operation manual for encoders

Multilingual: German, English, French
PDF ∼ 2,9 MB | 09.2022

Manual

Encoder with PROFIBUS interface

PDF ∼ 3,3 MB | 09.2020
DE
EN
Safety characteristics

Sendix 5878 MTTFd

Multilingual: German, English
PDF ∼ 158,3 KB | 06.2019

Declaration of conformity

Sendix 5858 / 5878 CE

Multilingual: German, English, French
PDF ∼ 387,0 KB | 04.2016

Device file

Sendix 58x8 PROFIBUS

ZIP ∼ 35,8 KB | 08.2017

Mechanical CAD / STEP

Sendix 5878

ZIP ∼ 4,3 MB | 10.2014

Electronic CAD / ePlan

Sendix 5858 / 5878 PROFIBUS DP

ZIP ∼ 6,2 MB | 02.2020

Product Certificates

Sendix 58x8 PROFIBUS PNO Certificate

PDF ∼ 128,2 KB | 10.2014
EN

Salt spray test ManufacturersDeclaration

PDF ∼ 39,6 KB | 05.2023
DE
EN

Encoder UL Canada

PDF ∼ 79,9 KB | 11.2019
EN

Encoder UL USA

PDF ∼ 78,2 KB | 11.2019
EN

Accessories

Stator coupling

Stator coupling

For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 mm
For lateral mounting on the encoder flange.
For applications with axial and radial play at high dynamics.

Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws

8.0010.1602.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.1602.0000

Torque stop, flexible

Torque stop, flexible

For hollow shaft encoders
with flange ø 58 mm
Mounting radius 39.5 ... 142.75 mm
Designed for functional safety technology.
For applications with axial and radial play at low dynamics.

Scope of delivery
- Torque support (stainless steel)
- 3 M3x6 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 1 screw

8.0010.4047.00FS
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.4047.00FS
Operation Manual
8.0010.4047.00FS - Accessories torque stop, flexible (FS)

Fastening arm set, rigid

Fastening arm set, rigid

For hollow shaft encoders
with flange ø 58 mm
Mounting radius 32.5 ... 143.5 mm
Designed for functional safety technology.
For applications with very low axial and radial play at low dynamics.

Scope of delivery
- Torque support (stainless steel)
- 3 screws M3x6 for mounting to the encoder

Connection to the application (not included in delivery)
- 1 torque pin 8.0010.4049.0075
8.0010.4051.00FS
Mechanical CAD / STEP
8.0010.4051.00FS
Operation Manual
8.0010.4051.00FS - Accessories torque stop, rigid (FS)

Stator coupling (FS)

Stator coupling (FS)

For hollow shaft encoders
with flange ø 58 mm
Mounting radius 31.5 mm
Designed for functional safety technology by 4-screw principle.

Scope of delivery
- Stator coupling (stainless steel)
- 4 screws M3x6 for mounting to the encoder

Connection to application (not included in delivery)
- 4 screws

8.0010.40B2.00FS
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.40B2.00FS
Operation Manual
Supplement to stator coupling operating instructions (FS)

Fastening arm, medium (flexible)

Fastening arm, medium (flexible)

For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 ... 45.75 mm
For applications with axial and radial play with constant rotary movements.

Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 1 screw
8.0010.40E0.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.40E0.0000

Stator coupling

Stator coupling

For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 mm
For lateral mounting on the encoder flange.
For applications with axial and radial play at high dynamics.

Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws

8.0010.40L0.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.40L0.0000

Fastening arm, short (flexible)

Fastening arm, short (flexible)

For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.25 mm
For applications with axial and radial play at low dynamics.

Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 1 screw
8.0010.40M0.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.40M0.0000

Spring tether element

Spring tether element

For hollow shaft encoders
with flange ø 50 ... 58 mm
For applications with low radial and axial play and low dynamics.

Scope of delivery
- Wire spring element
- 1 screw for mounting on the encoder.

Connection to the application (not included in delivery)
- 1 screw
8.0010.40W0.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR

Torque pin, long with fastening thread

Torque pin, long with fastening thread

For hollow shaft encoders
with flange ø 36 ... 58 mm
With mounting thread.

Suitable for:
- Spring element short (8.0010.4H00.0000)
- Spring element long (8.0010.4I00.0000)
8.0010.4700.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR

Stator coupling, double-winged

Stator coupling, double-winged

For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 31.5 mm
For lateral mounting on the encoder flange. For applications with high accuracy requirements.

Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 2 screws

8.0010.4D00.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.4D00.0000

Spring element, short

Spring element, short

For hollow shaft encoders
with flange ø 36 ... 58 mm
Mounting radius 16 ... 27 mm
For applications with limited axial play at low dynamics and limited installation space.

Scope of delivery
- Spring element (plastic)
- 1 screw for mounting on the encoder

Connection to the application (not included in delivery)
- Parallel pin 8.0010.4700.0000
8.0010.4H00.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.4H00.0000

Spring element, long

Spring element, long

For hollow shaft encoders
with flange ø 36 ... 58 mm
Mounting radius 30.7 ... 36.7 mm
For applications with high axial play, at low dynamics.

Scope of delivery
- Spring element (plastic)
- 1 screw for mounting on the encoder

Connection to the application (not included in delivery)
- Parallel pin 8.0010.4700.0000
8.0010.4I00.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.4I00.0000

Fastening arm, long, (flexible)

Fastening arm, long, (flexible)

For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 36.5 ... 85 mm
For applications with axial and radial play at low dynamics.

Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 1 screw
8.0010.4R00.0000
Data sheet
Accessories hollow shaft encoder
DE EN FR
Mechanical CAD / STEP
8.0010.4R00.0000

Cables and connectors

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Female connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3211.XXXM

Data sheet
M12 cordset, PUR, socket, 5-pin, B-coded, open end, Profibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Female connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3311.XXXM

Data sheet
M12 cordset, PUR, socket, 5-pin, B-coded, angled, open end, Profibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Male connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3411.XXXM

Data sheet
M12 cordset, PUR, male, 5-pin, B-coded, end open, Profibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Male connector 5-pin

Female connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3432.XXXM

Data sheet
M12 cordset, PUR, socket, 5-pin, B-coded + pin, probibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Male connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3511.XXXM

Data sheet
M12 cordset, PUR, male, 5-pin, B-coded, angled, open end, Profibus
DE EN FR

M12 Connector with cable ,

M12 Connector with cable ,

Preassembled cable set

PROFIBUS DP
Female connector 5-pin

Male connector 5-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6011.3533.XXXM

Data sheet
M12 cordset, PUR, socket, 5-pin, B-coded, angled + pin, Profibus
DE EN FR

SUB-D Connector with cable ,  Doppelkabel

SUB-D Connector with cable , Doppelkabel

Preassembled cable set

PROFIBUS DP
Female connector 5-pin
& Male connector 5-pin

Male connector 9-pin PUR Ø 7,6 mm ± 0,2 mm
2 x 0,34 mm2
05.00.6012.5536.XXXM

Data sheet
Cordset Sub-D and M12 connector, PUR, socket, 9-pin + 2 x M12, B-coded, 5-pin, Profibus
DE EN FR

M12 Connector ,

M12 Connector ,

Field-wireable connector

PROFIBUS DP
Male connector 5-pin
05.BMSWS 8151-8.5

Data sheet
M12 pin, 5-pin, B-coded
DE EN FR

M12 Connector ,

M12 Connector ,

Field-wireable connector

PROFIBUS DP
Male connector 5-pin
05.BMSWS 8251-8.5

Data sheet
M12 pin, angled, 5-pin, B-coded
DE EN FR

M12 Connector ,

M12 Connector ,

Field-wireable connector

PROFIBUS DP
Female connector 5-pin
05.BMWS 8151-8.5

Data sheet
M12 socket, 5-pin, B-coded
DE EN FR

M12 Connector ,

M12 Connector ,

Field-wireable connector

PROFIBUS DP
Female connector 5-pin
05.BMWS 8251-8.5

Data sheet
M12 socket, angled, 5-pin, B-coded
DE EN FR

M12 Connector , Lead-through

M12 Connector , Lead-through

Field-wireable connector

PROFIBUS DP
Female connector 5-pin
05.FKW-FSW45/M12

Data sheet
M12 bushing, 5-pole, B-coded
DE EN FR

M12 Connector , Abschlusswiederstand

M12 Connector , Abschlusswiederstand

Field-wireable connector

PROFIBUS DP
Male connector 5-pin
05.RSS4.5-PDP-TR

Data sheet
M12 pin, terminating resistor, Profibus
DE EN FR

„Do you have technical questions about Kübler encoders or are you looking for individual solutions? We at Application Support are here for you.“

Rainer Grueninger
Application support
Rainer Grueninger
Application Engineer

support@kuebler.com
+49 7720 3903 849

„We will be pleased to give you information about prices and delivery times. We are looking forward to your inquiry.“

Fritz Kübler GmbH
Sales
Fritz Kübler GmbH
Sales Germany

info@kuebler.com
+49 7720 3903 871
+49 7720 21564