Multifunction devices electronic
Codix 54U
|
|
Multifunction display with 4 dual functions.
The Codix 54U is a voltage-powered dual function counter with 4 functions in one device: Counter with 2 totalising ranges, totaliser and timer, totaliser and frequency meter, timer with 2 time ranges. For fast and slow count pulses, with 6-digit LED display for NPN, PNP input signals.Mechanical | |
---|---|
Model | Dual-function device electronic |
Functions |
Pulse counter Frequency display Tachometer without limi valuets Hour meters / timers Short-time meter Dual-function display |
Dimension 1 |
96 x 48 mm | 92 x 45 mm |
Protection level |
IP65 |
Working temperature | -20 °C ... +65 °C |
Weight | 150 g |
Reset |
electronic |
(1) Front panel size | Panel cut-out
Electrical | |
---|---|
Power supply |
100...240 (± 10%) V AC 10...30 V DC |
Signal input |
NPN PNP |
Powerful
- Fast count and frequency input – input frequency max. 60 kHz
- Robust housing – IP65 protected
- Very bright LED display, 14 mm high, 6 digits
- Very accurate precise frequency measurement principle (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are calculated using time-interval (period duration) measurement. Frequencies > 38 Hz are calculated using a special time base (gate time) measurement. A very high accuracy of < 0.1% is achieved, even with very short gate times. The resulting measurement is available after a max. of 50 ms.
- Short start-up time – detects input pulses just 16 msec after being switched on => no pulses are lost with a simultaneous motor start-up
- Large keys – can also be operated when wearing gloves
- Programming:
- Simple uniform menu-driven programming and operation
- Possible to enter the programming also during operation with a confirmation prompt
- Pressing the right key switches between displays
- Individually programmable scaling: multiplication and division factor (0.0001…99.9999), to displaycorresponding engineering units, e.g. position in 1/10 mm and speed in RPM
- Separate factors for frequency- and pulse counting
- AC or DC power supply
- Inputs: as an alternative to the HTL inputs, devices with a 5 V DC input level are available, for use as parallel displays for PLCs
- Timer specials: timer or hours-run meter with various Start /Stop measurements, time range settings in hours, minutes or seconds, with decimal point. Resolutions up to 1/1000 can be programmed.
Accessories
Enclosure, 48x96
For the installation of all equipment with the DIN 48x96mm dimensions. To attach the device on a DIN rail.G.300.005 |
Sealing gasket N.511030
External dimensions: 55 x 31.5 [2.166 x 1.286"]Internal dimensions: 37 x 24 [1.061 x 0.945"]
N.511030 |
Sealing gasket N.511031
External dimensions: 96 x 49 [3.78 x 1.929"]Internal dimensions: 92 x 45 [3.622 x 1.772"]
N.511031 |