Encoders Absolute singleturn
Sendix 5878
|
|
For field bus communication: Encoders with PROFIBUS DP interface.
The absolute encoders Singleturn Sendix 5858 / 5878 with PROFIBUS DP interface and optical sensors are the right solution for all Profibus applications. Distributed over 360°, the maximum resolution is 16 bits. These encoders are available with blind hollow shafts up to 15 mm.
Mechanical | |
---|---|
Dimension | Ø 58 mm |
Shaft type |
3/8 " hollow shaft, blind hole 10 mm hollow shaft, blind hole 12 mm hollow shaft, blind hole 14 mm hollow shaft, blind hole 15 mm hollow shaft, blind hole 1/2 " hollow shaft, blind hole |
Flange type |
Ø 58.00 mm Ø 63.00 mm Ø 65.00 mm |
Working temperature | -40 °C ... +80 °C |
Protection level |
IP65 IP67 |
Connection types |
M12 connector radial Terminal box |
Max. rotational speed |
9.000 min-1 |
Weight | 530 g |
Electrical | |
---|---|
Scanning | optical |
Resolution max. |
16 bits singleturn |
Power supply |
10...30 V DC |
Interfaces |
PROFIBUS DP |
- Proven use in applications with the highest demands such as wind power or mobile automation.
- IP67 protection and a wide temperature range from -40°C to +80°C make it particularly suitable for outdoor use.
- Fast, simple, error-free connection thanks to variant with M12 plug.
- Extensive programming possibilities by using the latest encoder profile.
Accessories
Stator coupling
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 mm
For lateral mounting on the encoder flange.
For applications with axial and radial play at high dynamics.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
8.0010.1602.0000 |
Torque stop, flexible
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 39.5 ... 142.75 mm
Designed for functional safety technology.
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 M3x6 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
8.0010.4047.00FS |
Fastening arm set, rigid
For hollow shaft encoderswith flange ø 58 mm
Mounting radius 32.5 ... 143.5 mm
Designed for functional safety technology.
For applications with very low axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws M3x6 for mounting to the encoder
Connection to the application (not included in delivery)
- 1 torque pin 8.0010.4049.0075
8.0010.4051.00FS |
Stator coupling (FS)
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 31.5 mm
Designed for functional safety technology by 4-screw principle.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws M3x6 for mounting to the encoder
Connection to application (not included in delivery)
- 4 screws
8.0010.40B2.00FS |
Fastening arm, medium (flexible)
For hollow shaft encoderswith flange ø 50 ... 58 mm
Mounting radius 32.5 ... 45.75 mm
For applications with axial and radial play with constant rotary movements.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
8.0010.40E0.0000 |
Stator coupling
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 mm
For lateral mounting on the encoder flange.
For applications with axial and radial play at high dynamics.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
8.0010.40L0.0000 |
Fastening arm, short (flexible)
For hollow shaft encoderswith flange ø 50 ... 58 mm
Mounting radius 32.25 mm
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
8.0010.40M0.0000 |
Spring tether element
For hollow shaft encoderswith flange ø 50 ... 58 mm
For applications with low radial and axial play and low dynamics.
Scope of delivery
- Wire spring element
- 1 screw for mounting on the encoder.
Connection to the application (not included in delivery)
- 1 screw
8.0010.40W0.0000 |
Stator coupling, double-winged
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 31.5 mm
For lateral mounting on the encoder flange. For applications with high accuracy requirements.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 2 screws
8.0010.4D00.0000 |
Spring element, short
For hollow shaft encoderswith flange ø 36 ... 58 mm
Mounting radius 16 ... 27 mm
For applications with limited axial play at low dynamics and limited installation space.
Scope of delivery
- Spring element (plastic)
- 1 screw for mounting on the encoder
Connection to the application (not included in delivery)
- Parallel pin 8.0010.4700.0000
8.0010.4H00.0000 |
Spring element, long
For hollow shaft encoderswith flange ø 36 ... 58 mm
Mounting radius 30.7 ... 36.7 mm
For applications with high axial play, at low dynamics.
Scope of delivery
- Spring element (plastic)
- 1 screw for mounting on the encoder
Connection to the application (not included in delivery)
- Parallel pin 8.0010.4700.0000
8.0010.4I00.0000 |
Fastening arm, long, (flexible)
For hollow shaft encoderswith flange ø 50 ... 58 mm
Mounting radius 36.5 ... 85 mm
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
8.0010.4R00.0000 |