The ready-to-go control and display solution for pulses, time and frequencies

Multifunction:

• To display, measure and control pulses, frequency, time and position.
• Local control functions – ready for use immediately – with many count modes and functions: just set the parameters and go.
• really easy to operate - directly displayed.
• Can be used as preset counter, batch counter and totaliser.
• Direct inputs of the preset or with tracking preset.

User-friendly:

Large 2-line, 2 x 6-digit LCD display with sign, leading zero suppression and annunciators, as well as backlighting for easy readability and clearer understanding in all situations.

The technology platform for OEM applications:

Numerous logic functions and preconfigured, selectable operating modes for a variety of applications, including for example positioning and batch counting, make the counter a real alternative to a PLC – and with the benefit of a display included. The devices are so designed that they are expandable for OEM applications. Both hardware and software can be modified and expanded. PCB-board receptacles are provided in the counter for hardware upgrade purposes:

• up to 10 inputs.
• up to 6 optocoupler outputs.
• up to 4 relay outputs.
• further individual functions:
  The software can be specifically customised to OEM applications. This includes the logic behaviour of the inputs and outputs (I/O functionality) or the whole display unit.

Display colours:

• Standard:
  positive green with optional backlighting.
• LED Look:
  negative, red backlighting.
• Multicolour:
  upper line negative, red backlighting.
  Lower line negative, red or green backlighting (programmable).

More:
[Data sheet]
[Manual Codix 923]
[Manual Codix 924]
[Manual Codix 924-4]
[Manual Codix 924-6]
[Online Data sheet Codix 92x]
[Press release]

Your contact person: Werner Birk

Codix 140: Pulse Counter.
Codix 142: Service Counter.
Codix 141: Standard Hour Meter.
Codix 143: Service Hour Meter.

Service counter :

• Preset output as display text and solid-state output.
• Pre-signal for service interval as display text.
• Manual or electrical reset of the display or service interval.

More:
[Data sheet Codix 141/143]
[Manual Codix 140/142]
[Online Data sheet Codix 140/142]

[Data sheet Codix 140/142]
[Manual Codix 141/143]
[Online Data sheet Codix 141/143]

[Press release]

Your contact person: Werner Birk

Codix 52T: Dual Totaliser with common input.
Codix 52C: Dual totaliser with separate inputs.

• Measurement of production data, piece count and overall total.
• Measurement of packing units and total quantity in one device.
• Separate scaling of both inputs.
• Very bright LED, 8 mm high.
• User-friendly, thanks to menu-driven programming.
• Mathematical linking of the inputs (only with 52C).
• DIN front bezel 24 x 48 mm.

More:
[Data sheet Codix 52C]
[Manual Codix 52C]
[Online Data sheet Codix 52C]

[Data sheet Codix 52T]
[Manual Codix 52T]
[Online Data sheet Codix 52T]

[Press release]

Your contact person: Werner Birk

• Suitable for CAN and CANopen.
• Automatic baud rate detection.
• Segments can be written to directly.
• Factor and Offset.
• Direct value display without master.
• DIN bezel 24 x 48.
• Protection IP65.
• Very bright LED, 8 mm high.

More:
[Data sheet Codix 538]
[Manual Codix 538]
[Online Data sheet Codix 538]
[EDS File Codix 538]
[Press release]

Your contact person: Werner Birk

... with 2 incremental inputs TTL, RS422 or HTL with max. 1 MHz, 4 fast switching outputs, RS232 and optional fast analogue output. All values freely scalable and can be assigned separately from each other to both inputs.

The 572 can be used either in one-channel or two-channel mode. The outputs, control inputs and the analogue output can be assigned to the various display values.
Additional annunciators are provided for status display.

• Innovative:
  2 separate fast inputs, which can be
  calculated with respect to each other.
  Many permanently stored count functions.
• Compact:
  3 display values in one device, 4 fast switching outputs, AC and DC supply.
• Versatile:
  Interface as standard for read in and out, scalable, many different functions.

More:
[Data sheet Codix 572]
[Manual Codix 572]
[Online Data sheet Codix 572]
[OS 2-Software]
[Press release]

Your contact person: Werner Birk

... for optimal metering of costs

• Allows accurate and traceable billing for hire equipment that has a heavy current consumption.
• Also available with MID approval.
• Suitable for insurance settlement purposes.
• The meters can be officially calibrated to comply with PTB standards.
• Tamper-proof and displays both values even if no voltage is applied.

Easy to retrofit:

The HW66 is identical in construction to existing hours-run meters and is very easy to retrofit.

Remote readout:

Thanks to an optional SO output.

More:
[Data sheet HW66]
[Manual HW66]
[Online Data sheet HW66]
[MID approval HW66]

Your contact person: Werner Birk