Encoders Absolute multiturn

Sendix F5868

High precision
Resistant
Without gear with 100% magnetic insensitivity

Dimension Ø 58 mm
16 bits singleturn
16 bits multiturn
Max 10 mm shaft, with flat surface
Max 3/8" shaft, with flat surface

Video

Intelligent Scan Technology™ – electronic field bus encoders.

The absolute encoders Multiturn Sendix F5868 / F5888 with Modbus interface and patented Intelligent Scan Technology™ are particularly high-resolution optical encoders without gears with 100% magnetic insensitivity. 32 bit total resolution, through hollow shaft up to 15 mm and Modbus RTU interface.

Mechanical
Dimension	Ø 58 mm
Shaft type	6 mm shaft, with flat surface 10 mm shaft, with flat surface 1/4 " shaft, with flat surface 3/8 " shaft, with flat surface
Flange type	Synchro flange / Servo flange Clamping flange Ø 58.00 mm
Working temperature	-40 °C ... +80 °C
Protection level	IP65 IP67
Connection types	M12 connector radial
Max. rotational speed	12.000 min^-1
Weight	450 g

Electrical
Scanning	optical
Resolution max.	16 bits singleturn 16 bits multiturn
Power supply	10...30 V DC
Interfaces	Modbus

Options
on request	Further impulse counters/resolutions

Reliable and insensitive

Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
Due to IP67 protection and wide temperature range from -40°C to +80°C also suitable for outdoor use.
Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 32 bit and 100 % magnetic insensitivity.

Current Modbus Performance

Modbus register for configuring the node address and baud rate.
Scaling Function.
32 bit total resolution (16 bit MT + 16 bit ST).
Preset function.
Diagnostic functions.
Limit switch function.

Application exemples

Air conditioning, cooling, heating, and humidifying technology
Geared motors
Elevators

And more ...

Accessories

Bellows coupling

Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.

Bellows coupling (stainless steel).

8.0000.1102.XXXX

Assembly bell

For shaft encoders with flange ø 50 ... 58 mm
Fast encoder mounting. Electrical and thermal insulation through glass-fibre reinforced plastic and insulating spring washer coupling - complete delivery as a set.

Scope of delivery
- Mounting bell
- Spring washer coupling (8.0000.1401.XXXX)
- Mounting eccentric (8.0000.4B00.0000)
- Mounting accessories

8.0000.4500.XXYY

Adapter flange, square, 4 mm

For shaft encoders with clamping flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 4 screws

58,0 mm x 4 mm	8.0010.2100.0000
63,5 mm x 3 mm	8.0010.2120.0000
70,0 mm x 10 mm	8.0010.2600.0000
80,0 mm x 4 mm	8.0010.2800.0000

Flange, Ø 115mm Euroflange

For shaft encoders with flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder

Connection to the application (not included in delivery)
- 6 screws

Drehgeber 580x/5000

8.0010.2160.0000

Flange, Ø 58mm

For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws

8.0010.2180.0000

Flange, Ø 65mm

For shaft encoders with flange ø 50 ... 58 mm
With this flange adapter, Kübler encoders of size 58 mm can replace third-party encoders of size 65 mm.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws

8.0010.2230.0000

Flange, Ø 90mm

For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder

Connection to the application (not included in delivery)
- 6 screws

8.0010.2270.0000

Angular flange

For shaft encoders with flange ø 50 ... 58 mm

Scope of delivery
- Angle flange (aluminium)
- 3 screws for fastening to the encoder.

Connection to the application (not included in delivery)
- 2 screws

8.0010.2300.0000

Fastening eccentrics

For shaft encoders with synchro flange ø 50 ... 70 mm

Scope of delivery
- 3 eccentric
- 3 screws

8.0010.4100.0000

Bearing box

For shaft encoder with clamping flange ø 58 mm and shaft 10 x 20 mm
When the encoder is driven by a toothed or chain wheel, V-belt or toothed belt, impeller, etc., the permissible axial or radial shaft loads are usually exceeded during operation. For these cases, the bearing box equipped with reinforced bearings is ideally suited.

Scope of delivery

Bearing box with lock and O-ring
Coupling for shaft 10 mm
Adapter flange 8.0010.2100.0000
Mounting accessories

8.0010.8200.0004

Robust bearing unit

For shaft encoders with clamping flange ø 50 ... 58 mm and shaft 10 mm
The separation of the bearing load and the sensor system provides the encoder with additional protection in harsh environments.

Scope of delivery