Encoders Absolute singleturn

Sendix 5858

Particularly resistant
Reliable
Latest encoder profile

Dimension Ø 58 mm
16 bits singleturn
Max 10 mm shaft, with flat surface
Max 3/8" shaft, with flat surface

Video

For field bus communication: Encoders with CANopen interface.

The absolute encoders Singleturn Sendix 5858 / 5878 with CANopen interface and optical sensors can be used in all CANopen applications. Distributed over 360°, the maximum resolution is 16 bits. These encoders are available with blind hollow shafts up to 15 mm.

Mechanical
Dimension	Ø 58 mm
Shaft type	6 mm shaft, with flat surface 10 mm shaft, with flat surface 1/4 " shaft, with flat surface 3/8 " shaft, with flat surface
Flange type	Synchro flange / Servo flange Clamping flange Square flange Ø 58.00 mm ❏ 63,50 mm
Working temperature	-40 °C ... +80 °C
Protection level	IP65 IP67
Connection types	Radial cable M23 connector radial M12 connector radial Terminal box
Max. rotational speed	9.000 min^-1
Weight	530 g

Electrical
Scanning	optical
Resolution max.	16 bits singleturn
Power supply	10...30 V DC
Interfaces	CANopen

Reliable

Excellent for applications such as mobile automation or medical technology.
Due to IP67 protection and wide temperature range from -40°C to +80°C also suitable for outdoor use.

Flexible

Node address configurable via rotary switch or software.
Baud rate and termination adjustable via DIP switches or software.
With bus hub or fixed connection and with M12 plug or cable connection.

Accessories

Bellows coupling

Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.

Bellows coupling (stainless steel).

8.0000.1202.XXXX

Assembly bell

For shaft encoders with flange ø 50 ... 58 mm
Fast encoder mounting. Electrical and thermal insulation through glass-fibre reinforced plastic and insulating spring washer coupling - complete delivery as a set.

Scope of delivery
- Mounting bell
- Spring washer coupling (8.0000.1401.XXXX)
- Mounting eccentric (8.0000.4B00.0000)
- Mounting accessories

8.0000.4500.XXYY

Adapter flange, square, 4 mm

For shaft encoders with clamping flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 4 screws

58,0 mm x 4 mm	8.0010.2100.0000
63,5 mm x 3 mm	8.0010.2120.0000
70,0 mm x 10 mm	8.0010.2600.0000
80,0 mm x 4 mm	8.0010.2800.0000

Flange, Ø 115mm Euroflange

For shaft encoders with flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder

Connection to the application (not included in delivery)
- 6 screws

Drehgeber 580x/5000

8.0010.2160.0000

Flange, Ø 58mm

For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws

8.0010.2180.0000

Flange, Ø 65mm

For shaft encoders with flange ø 50 ... 58 mm
With this flange adapter, Kübler encoders of size 58 mm can replace third-party encoders of size 65 mm.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws

8.0010.2230.0000

Flange, Ø 90mm

For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder

Connection to the application (not included in delivery)
- 6 screws

8.0010.2270.0000

Angular flange

For shaft encoders with flange ø 50 ... 58 mm

Scope of delivery
- Angle flange (aluminium)
- 3 screws for fastening to the encoder.

Connection to the application (not included in delivery)
- 2 screws

8.0010.2300.0000

Fastening eccentrics

For shaft encoders with synchro flange ø 50 ... 70 mm

Scope of delivery
- 3 eccentric
- 3 screws

8.0010.4100.0000

Bearing box

For shaft encoder with clamping flange ø 58 mm and shaft 10 x 20 mm
When the encoder is driven by a toothed or chain wheel, V-belt or toothed belt, impeller, etc., the permissible axial or radial shaft loads are usually exceeded during operation. For these cases, the bearing box equipped with reinforced bearings is ideally suited.

Scope of delivery

Bearing box with lock and O-ring
Coupling for shaft 10 mm
Adapter flange 8.0010.2100.0000
Mounting accessories

8.0010.8200.0004

Robust bearing unit

For shaft encoders with clamping flange ø 50 ... 58 mm and shaft 10 mm
The separation of the bearing load and the sensor system provides the encoder with additional protection in harsh environments.

Scope of delivery