Multifunction devices electronic
Codix 52U
|
|
Multifunction display with 4 dual functions.
The Codix 52U is a voltage-powered dual function counter with 4 functions in one device:Counter with 2 totalising ranges, totaliser and timer, totaliser and frequency meter, timer with 2 time ranges. For fast and slow count pulses, with 6-digit LED display for NPN, PNP input signals.
Mechanical | |
---|---|
Model | Dual-function device electronic |
Functions |
Pulse counter Frequency display Tachometer without limi valuets Hour meters / timers Short-time meter Dual-function display |
Dimension 1 |
48 x 24 mm | 45 x 22 mm |
Protection level |
IP65 |
Working temperature | -20 °C ... +65 °C |
Weight | 50 g |
Reset |
electronic |
(1) Front panel size | Panel cut-out
Electrical | |
---|---|
Power supply |
10...30 V DC |
Signal input |
NPN PNP |
Powerful
- Fast count and frequency input – input frequency max. 60 kHz
- Robust housing – IP65 protected
- Very bright LED display, 8 mm high, 6 digits
- Very accurate precise frequency measurement principle (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are calculated using time-interval (period duration) measurement. Frequencies > 38 Hz are calculated using a special time base (gate time) measurement. A very high accuracy of < 0.1% is achieved, even with very short gate times. The resulting measurement is available after a max. of 50 ms.
- Short start-up time – detects input pulses just 16 msec after being switched on => no pulses are lost with a simultaneous motor start-up
- Large keys – can also be operated when wearing gloves
- Programming:
- Simple uniform menu-driven programming and operation
- Possible to enter the programming also during operation with a confirmation prompt
- Pressing the right key switches between displays
- Individually programmable scaling: multiplication and division factor (0.0001…99.9999), to display corresponding engineering units, e.g. position in 1/10 mm and speed in RPM
- Separate factors for frequency- and pulse counting
- Inputs: as an alternative to the HTL inputs, devices are available with a 4 ... 30 V DC input level, for use as parallel displays to PLCs
- Timer specials: timer or hours-run meter with various Start/Stop measurements, time range settings in hours, minutes or seconds, with decimal point. Resolutions up to 1/1000 can be programmed.
Accessories
Sealing cover K1
Flexible sealing cover made of soft PVC, with varnished steel metal frame and fixing screws. IP 54 protection to DIN 40050 when installed. Suitable for B15.31, B16.31, B16.30, B18.30, F1B15.01, F1B16.01, F1B16.00 and F1B18.00. With Bezel adapter N.003.001 for 130, 131, 132, 133, 134, 135, 136, 140, 141, 142, 143, 520, 521, 522, 523, 524, 52U, 52P, 52T.Sealing cover (PVC) with varnished steel metal frame, 2 fixing screws M4x15.
Grau | G.008.300 |
Schwarz | G.008.301 |
Enclosure, 24x48
For panel-mounting all counters, timers and process indicators, with DIN size 24x48mm [0.945x1.89"] or 50x25mm [1.969x0.984"]. Cut-out 25x50mm [0.984x1.969"]. For snap-on fitting to 35mm [1.378"] top hat DIN rails.Mounting panel for counter (chrome-plated sheet steel), Top hat DIN rail adapter (glass fibre reinforced polyamide).
G.300.004 |
Transparent cover, lockable
Screw-on transparent cover, 1 Dv, lockable for size F1. IP 65 protection with front bezel. Suitable for B15.31, B16.31, B16.30, B18.30, F1B15.01, F1B16.01, F1B16.00 and F1B18.00. With Bezel adapter N.003.001 for 130, 131, 132, 133, 134, 135, 136, 140, 141, 142, 143, 520, 521, 522, 523, 524, 52U, 52P, 52T.Transparent cover, gasket, 2 fixing screws.
N.003.002 |