Signal converters
SK 1S1D-1A2RS
|
|
Universal signal converter for analog output signals.
The SK 1A-1S1D2RS is a universal converter for analog output signals of ±10 V or 0/4 to 20 mA. The module converts digital signals into a analog format (frequency, position, or angular position), while the input format can be an incremental signal or an absolute value in SSI format. In addition, the conversion result can be retrieved via a serial RS232 or RS485 interface or a USB port. The module is quickly and easily mounted in the control cabinet on a standard DIN rail.Mechanical | |
---|---|
Dimension | 23 mm x 102 mm x 102 mm |
Working temperature | 0 °C ... 45 °C |
Protection level |
IP20 |
Connection types |
Screw terminals |
Electrical | |
---|---|
Input interfaces |
4 Last, 3 Signal HTL TTL / RS422 SSI, binär SSI, gray Printer CR/LF |
Output interfaces |
Analog ±10 V Analog 0...10 V Analog 0...20 mA Analog 4–20 mA RS232 RS485 |
Input frequency | 1.000.000 Hz |
Output frequency | Hz |
Power supply |
18...30 V DC |
Characteristics
- Multifunction device with operating modes for incremental encoders or absolute SSI encoders.
- RS232- / RS485 interface for serial read-out of the sensor information.
- Scalable analog output configurable for voltage or current operation.
- Additional functions such as bit blanking, round loop function, etc.
- Specification possibility for any characteristic linearization curves.
- Easy programming by TEACH function or with a PC.
- Auxiliary voltage output 5 and 24 V DC for encoder supply.
- Extremely short conversion times.
- Integration of fast SSI inputs in the PLC.
- Absolute SSI monitoring possible also with an analog input.
- Read-out possible also via RS232/RS485.
- For singleturn and multiturn encoders with SSI formats from 10 ... 32 bit.
- Simple parameterization via user interface OSxx (freeware).
Accessories
Cables and connectors
SUB-D Connector with cable ,
Preassembled cable set
Male connector 9-pin
8.0000.6V00.XXXX.0082