|Measuring system with mobile encoder holder, mounted on springs, (with rack and pinion) for an optimum contact pressure and protection of the encoder shaft.
Components suited optimally to each other. One rotation of the pinion corresponds to a movement of 50 mm.
|Supply voltage||10...30 VDC
The holding device for the encoder (8.0010.7000.0004) is a mov - able support for encoders, to the shaft of which, for instance, a measuring wheel or pinion can be attached. Due to the fact that it is movable, optimum contact pressure is ensured and overload on the bearings of the encoder prevented.
When used in conjunction with a pulse generating unit, the rack and pinion combination (8.0010.7000.0001 and ...02) serves as a simple length and displacement measuring system. One rotation of the pinion on the rack corresponds to a displacement of 50 mm. Moreover the racks are designed in such a way that they can be butt-mounted without pitch error.
The absolute accuracy is 0.5 mm per meter. The resolution / re - petition accuracy is 0.1 mm. Holding device, rack and pinion are available as a set for the purpose of displacement measurement (8.0010.7000.0005). The installation aid (8.0010.7000.0003) is required to maintain exact pitch when butt-mounting racks.
Typical areas of application are:
• Wood working industry
• Textile industry
• Handling and automation technology
• Mechanical engineering / Special machines
Data sheet: Längenmess-Set mit Zahnstange und Ritzel
Data sheet: Length measuring kit with rack and pinion
Data sheet: Kits de mesure de longueur avec pignon et crémaillère
In this area we do have information for our sales partners only.
If you are sales partner of the Kübler Group please login to access to your sales information.