youtube.com/user/KueblerGroup  linkedin.com/company/kuebler-group---fritz-k-bler-gmbh  facebook.com/KueblerGroup  @KueblerGroup

Standard optic 5860 DeviceNet

z1521_5868 RoHS UL DeviceNet 

Quote request
Your contact person: Rainer Grueninger

More information
Hohe Drehzahl
High rotational speed
Hoher IP-Wert
High IP value
Remains sealed even in roughest environments, ensures highest safety against field breakdowns.
Hohe Wellenbelastbarkeit
High shaft load capacity
For a long service life.
Vibrationsfest
Shock / vibration resistant
High shock and vibration resistance, for a particularly tough product.
Kurzschlussfest
Short-circuit proof
The outputs of all the encoders are short-circuit protected, provided that the supply voltage is correctly wired.
If an output is connected by mistake to 0 V or +UB or with another output, the device will not be damaged. As soon as the error is corrected, the encoder is ready for use again,>br />
Benefit:
Wiring circuit errors during installation that often occur in the hectic of day-to-day industrial environment do not lead to the encoder being permanently damaged.
Verpolschutz
Reverse polarity protection
Galvanic isolation with reverse polarity protection for the supply voltage.
Product family
5860
Dimensions
Ø 60 mm
Shaft max.
Ø 10.00 mm
Speed max.
6000 rpm
Protection max.
IP 65
Interface
DeviceNet
Connection
Cable
M12-Connector
Resolution max.
13+12 bit
Temperature
-20...+80°C
Power supply
10...30 VDC
Options

  • Self-assembly Connectors
  • Self-assembly Bus-Connectors
  • Pre-assembled Bus cables
  • Cable
  • Accesorios Tecnología de conexión
  •  
  • Connection Technology from Kübler = Guaranteed System Safety!

    All the products in the Connection Technology section have been tested and approved with the relevant compatible Kübler sensors.
    We give you our guarantee on this supported by professional levels of service.

    Your benefit:
    • Elimination of connection errors - no laborious fault finding.
    • Optimal shielding - avoids EMC problems.
    • Shorte installation times - saves time, cuts costs.
    • No time-consuming search for the right connector or cable - saves time, eliminates errors.
  • z908_flanschadapter
    Flange, square
    Converts encoders with a clamping flange into square flange.
     Order code
     8.0010.2100.0000 ❒ 58mm, 4mm thick
     8.0010.2120.0000 ❒ 63,5mm, 3mm thick
     8.0010.2600.0000 ❒ 70mm, 10mm thick
     8.0010.2800.0000 ❒ 80mm, 4mm thick
    z1721_flanschadapter
    Flange, Ø 70mm
    Converts encoders with a clamping flange into synchro flange.
     Order code
     8.0010.2200.0000 Ø 70mm, 5mm thick
     8.0010.2500.0000 Ø 70mm, 10mm thick
    z1077_flanschadapter
    Flange, Ø 65mm
    With this adapter flange, Kuebler encoders with size 58mm can replace encoders with diameter 65 and pitch circle diameter 48mm.
     Order code
     8.0010.2230.0000
    z1723_flanschadapter
    Flange, Ø 115mm Euroflange
    Converts encoders with a clamping flange into synchro flange.
     Order code
     8.0010.2160.0000
    z1661_flanschadapter
    Flange, Ø 58mm
    Converts encoders with a clamping flange into synchro flange.
     Order code
     8.0010.2180.0000
    z1724_flanschadapter
    Flange, Ø 90mm
    Converts encoders with a clamping flange into synchro flange. Mechanically compatible with former encoder Type 9000.
     Order code
     8.0010.2270.0000
    z1722_winkelflansch
    Angular flange
    Secure mounting for shaft encoder.
     Order code
     8.0010.2300.0000
    z918_montageglocke
    Assembly bell
    Easy and quick encoder mounting. Electrical and thermal isolation by means of glass fibre reinforced plastic and isolating spring washer coupling. Supplied as complete set.
     Order code
     8.0000.4500.XXYY XX=Ø d1, YY=Ø d2
    z986_lagerbox
    Bearing box
    In applications where the encoder is driven by use of gears, chains, belts etc. and the permitted axial and radial shaft loads are exceeded, we recommend the use of the special designed bearing box which has stronger bearings.
     Order code
     8.0010.8200.0004
    z910_balgkupplung
    Bellows coupling
    Bellows couplings provide cost-effective connection of the motor and encoder. They are also able to correct any angular errors between the drive and encoder. Compensating larger angle displacements.
     Order code
     8.0000.1102.XXXX XX=Ø d1, XX=Ø d2
    z910_balgkupplung
    Bellows coupling
    Bellows couplings provide cost-effective connection of the motor and encoder. They are also able to correct any angular errors between the drive and encoder. Compensating larger angle displacements.
     Order code
     8.0000.1202.XXXX XX=Ø d1, XX=Ø d2
    z910_balgkupplung
    Bellows coupling
    Bellows couplings provide cost-effective connection of the motor and encoder. They are also able to correct any angular errors between the drive and encoder. Compensating larger angle displacements.
     Order code
     8.0000.1502.XXXX XX=Ø d1, XX=Ø d2
    z911_federscheibenkupplung
    Spring washer coupling
    For applications witrh with high speeds and and smaller angular displacements. Electrically insulating between encoder and drive.
     Order code
     8.0000.1302.XXXX XX=Ø d1, XX=Ø d2
    z911_federscheibenkupplung
    Spring washer coupling
    For applications witrh with high speeds and and smaller angular displacements. Electrically insulating between encoder and drive.
     Order code
     8.0000.1402.XXXX XX=Ø d1, XX=Ø d2
    z1712_paguflex
    Paguflex
    The safe, uncomplicated and economical solution, if drive shafts with angular, radial and/or axial displacement are to be frictionlocked together. Bore diameter on both sides are 6mm.
     Order code
     8.0000.1G01.0606
    z1712_paguflex
    Paguflex
    The safe, uncomplicated and economical solution, if drive shafts with angular, radial and/or axial displacement are to be frictionlocked together. Bore diameter on both sides are 10mm.
     Order code
     8.0000.1H01.1010
  •  
  • All accessories