youtube.com/user/KueblerGroup  linkedin.com/company/kuebler-group---fritz-k-bler-gmbh  facebook.com/KueblerGroup  @KueblerGroup

Compact optic 3610

z1561_3610 RoHS UL 

Quote request
Your contact person: Rainer Grueninger

More information
Hohe Drehzahl
High rotational speed
Vibrationsfest
Shock / vibration resistant
High shock and vibration resistance, for a particularly tough product.
Verpolschutz
Reverse polarity protection
Galvanic isolation with reverse polarity protection for the supply voltage.
Kurzschlussfest
Short-circuit proof
The outputs of all the encoders are short-circuit protected, provided that the supply voltage is correctly wired.
If an output is connected by mistake to 0 V or +UB or with another output, the device will not be damaged. As soon as the error is corrected, the encoder is ready for use again,>br />
Benefit:
Wiring circuit errors during installation that often occur in the hectic of day-to-day industrial environment do not lead to the encoder being permanently damaged.
Magnetfest
Magnetic field proof
Insensitive to strong magnetic fields - even powerful magnetic fields, e.g. around geared motor brakes, cannot interfere with the operation.
Optische Sensorik
Optical sensor
High-accuracy optical sensor. Insensitive to magnetic perturbations.
Product family
3610
Dimensions
Ø 36 mm
Shaft max.
Ø 6.35 mm
Speed max.
12000 rpm
Protection max.
IP 64
Interface
Push-Pull
RS422
Connection
Cable
M12-Connector
Resolution max.
2500 Imp.
Temperature
-20...+85°C
Power supply
5 VDC
5...18 VDC
8...30 VDC
Options
10by10 Product
Bearing life

Bearing life for shaft encoders Type 36x0.

  • Self-assembly Connectors
  • Pre-assembled Cordsets
  • Cable
  •  
  • Connection Technology from Kübler = Guaranteed System Safety!

    All the products in the Connection Technology section have been tested and approved with the relevant compatible Kübler sensors.
    We give you our guarantee on this supported by professional levels of service.

    Your benefit:
    • Elimination of connection errors - no laborious fault finding.
    • Optimal shielding - avoids EMC problems.
    • Shorte installation times - saves time, cuts costs.
    • No time-consuming search for the right connector or cable - saves time, eliminates errors.
  • z920_befestigungsexzenter
    Fastening eccentrics
    For shaft encoders with synchronous flange. Use at least three fastening eccentrics to mount the encoder.
     Order code
     8.0010.4200.0000
    z910_balgkupplung
    Bellows coupling
    Bellows couplings provide cost-effective connection of the motor and encoder. They are also able to correct any angular errors between the drive and encoder. Compensating larger angle displacements.
     Order code
     8.0000.1102.XXXX XX=Ø d1, XX=Ø d2
    z910_balgkupplung
    Bellows coupling
    Bellows couplings provide cost-effective connection of the motor and encoder. They are also able to correct any angular errors between the drive and encoder. Compensating larger angle displacements.
     Order code
     8.0000.1202.XXXX XX=Ø d1, XX=Ø d2
    z910_balgkupplung
    Bellows coupling
    Bellows couplings provide cost-effective connection of the motor and encoder. They are also able to correct any angular errors between the drive and encoder. Compensating larger angle displacements.
     Order code
     8.0000.1502.XXXX XX=Ø d1, XX=Ø d2
    z911_federscheibenkupplung
    Spring washer coupling
    For applications witrh with high speeds and and smaller angular displacements. Electrically insulating between encoder and drive.
     Order code
     8.0000.1302.XXXX XX=Ø d1, XX=Ø d2
    z911_federscheibenkupplung
    Spring washer coupling
    For applications witrh with high speeds and and smaller angular displacements. Electrically insulating between encoder and drive.
     Order code
     8.0000.1402.XXXX XX=Ø d1, XX=Ø d2
    z1712_paguflex
    Paguflex
    The safe, uncomplicated and economical solution, if drive shafts with angular, radial and/or axial displacement are to be frictionlocked together. Bore diameter on both sides are 6mm.
     Order code
     8.0000.1G01.0606
  •  
  • All accessories