Safety-Lock™ Interlocked bearings, large bearing span and extra strong outer bearings ensure stability when subjected to vibration and tolerance of installation errors. Machine downtime and repairs are eliminated.
High rotational speed
High IP value Remains sealed even in roughest environments, ensures highest safety against field breakdowns.
High shaft load capacity For a long service life.
Shock / vibration resistant High shock and vibration resistance, for a particularly tough product.
Magnetic field proof Insensitive to strong magnetic fields - even powerful magnetic fields,
e.g. around geared motor brakes, cannot interfere with the operation.
Short-circuit proof The outputs of all the encoders are short-circuit protected, provided that the supply voltage is correctly wired.
If an output is connected by mistake to 0 V or +UB or with another output, the device will not be damaged. As soon as the error is corrected, the encoder is ready for use again,>br />
Wiring circuit errors during installation that often occur in the hectic of day-to-day industrial environment do not lead to the encoder being permanently damaged.
Reverse polarity protection Galvanic isolation with reverse polarity protection for the supply voltage.
Optical sensor High-accuracy optical sensor. Insensitive to magnetic perturbations.
Seawater-resistant Can be used in maritime applications - housing and flange out of seawater-resistant aluminium.
Ø 58 mm
Hollow shaft max.
Ø 15.00 mm
Cable M12-Connector M23-Connector MIL-Connector
5 VDC 5...30 VDC 10...30 VDC
Dust EX Zone 2,22 Seawater resistant 10by10 Product
Connection Technology from Kübler = Guaranteed System Safety!
All the products in the Connection Technology section have been tested and approved with the relevant compatible Kübler sensors.
We give you our guarantee on this supported by professional levels of service.
Elimination of connection errors - no laborious fault finding.
Optimal shielding - avoids EMC problems.
Shorte installation times - saves time, cuts costs.
No time-consuming search for the right connector or cable - saves time, eliminates errors.
Isolation insert, hollow shaft Ø 15mm Thermal and electrical isolation of the encoders (Temperature range -40 ... +115°C). Isolation inserts prevent currents from passing through the encoder bearings. These currents can occur when using inverter controlled threephase or AC vector motors and considerably shorten the service life of the encoder bearings. In addition the encoder is thermally isolated as the plastic does not transfer the heat to the encoder.