]
News Sensor Technology
Systems and components for Functional Safety
 |
Safety modules for safe drive monitoring Safe motion control for speed or position monitoring in multi-axes operation - the Safety-M modules allow you implementing your safety technique tasks in compliance with the Machinery Directive 2006/42/EC. Independently from the drive technology, the Safety-M modules offer all functions according to EN 61800-5-2 for drive monitoring and, in addition, practice-oriented function extensions. Safety-MS1/MS2 - Speed monitoring 1 / 2 axes System solutions for Functional Safety Just safe single components do not ensure a safe global application. Only the optimal combination of safety sensors and safety monitoring modules brings about reliable solutions, which will meet the necessary safety requirements The optimal combination of Kübler's Safety-M modules and Sendix SIL encoders allows an easy implementation of a safe drive monitoring system. More: Your contact person: |
Incremental and absolute encoders for Functional Safety
 
 |
Safety is - not least since the EU Machinery Directive 2006/42/EG - an "integral part of the construction of drives". When choosing the right encoder for functional safety the principle applies that safety is achieved through the intelligent combination of encoder, controller and actuator. Sendix SSI absolute encoders, with an additional Sin/Cos incremental output, and Sin/Cos versions of incremental encoders are available with certification. But safety goes further than this: safe components are characterised by a robust reliable interface and by the ability to cope with high mechanical and electronic loads. Safe Incremental Encoder Function Safe Absolute Encoder Function Safe mechanical connection More: Product details: Brochure Functional Safety Your contact person: |
Sendix ATEX encoders for Functional Safety
 |
EX protection and Functional Safety in one device The Sendix encoders Sendix 7014SIL, 7053SIL and 7063SIL can be used in safety-relevant applications up to SIL3 according to DIN EN ISO 61800-5-2 or PLe according to DIN EN ISO13849. Sendix 7014SIL - Incremental Encoder (SinCos) The Sendix ATEX encoders with "flameproof enclosure" are approved for zones 1, 2, 21 and 22. The compact design, with its installation depth of only 145 mm, diameter of 70 mm and space-saving cable outlet, rounds off the flexible, diverse application possibilities in areas with explosion hazards. More: Product details: Your contact person: |
Sendix Heavy Duty H100 - Incremental Encoder with optional mechanical speed switch or double encoder
The Sendix Heavy Duty H100 are an extremely rugged family of incremental encoders available in 3 versions: encoders with or without speed switch and double encoders.
 |
Incremental encoder
|
 |
Encoder with mechanical speed switchAdditional features of the speed switch:
|
|
Incremental double encoderTwo encoders in the same device to increase the functional safety in case of failure of an encoder. |
 More information about HD-Safety-Lock™.  More information about Innovative Connection Technology. |
Thanks to the special HD-Safety-Lock™ construction they are ideally suited for applications in heavy industry, such as steel works and cranes. Resistant materials, wide temperature ranges and a high protection level ensure they remain unaffected by the harshest environmental conditions. Their innovative connection technology enables simple quick installation. Suitable for your Heavy-Duty application
More: Product details: Kübler encoders for use in steel works. Robust and accurate. Your contact person: |
Real-time encoders - Sendix Singleturn and Multiturn with
PROFINET interface
 |
In the devices Sendix 5858 / 5878 (Singleturn) and Sendix 5868 / 5888 (Multiturn) with Profinet interface the complete encoder profile according to "Profile Encoder Version 4.1" as well as the "Identification & Maintenance Functionality in Version 1.16" (IM blocks 0, 1, 2, 3 and 4) has been implemented. The encoders support the Isochronous Real-Time-Mode - also called the IRT-Mode - and are therefore ideal for real-time applications. The IRT-Mode offers, via a decoupling of the real-time communication from the standard communication (TCP/IP), a real-time solution for all high-performance application such as synchronous applications.
Visual warning and alarm signals advise of sensor faults, undervoltage or over-temperature. The standard Ethernet equipment ensures a direct link, for example from a laptop to the encoder. Fault diagnosis is therefore much simpler, allowing the measures necessary to correct the problem to be taken without delay, so avoiding long machine downtimes. The resolution for the singleturn devices is up to 16 bits and for multiturn devices up to 28 bits total resolution. More: Product details: Your contact person: |
IS60 - Inclinometer with CANopen® interface
 |
The inclinometer IS60 permits 2-dimensional inclinations to be measured. Versions are available for the measuring ranges ± 10°, ± 45° or ± 60°. The sensor has a standardised CANopen® interface, which enables easy configuration and start-up. All the parameters are stored in the internal permanent memory. The benefits at a glance:
More: Product details: Your contact person: |
Sendix Absolute Encoders with BISS-C-Interface
 
|
Open Standard Sensor/Actuator Communication The BiSS-C-Interface features bidirectional isochronous communication between sensors, actuators and industrial controls. The purely digital link and its protocol has been designed for maximum performance, transmission reliability and security. Remarkable cost savings are obtained by reducing efforts for hardware, for installation and maintenance tasks. Without affecting the payload data of measurements or interfering with control cycles the communication protocol incorporates a permanent, bidirectional access to slave registers. That way device parameters and additional measurement data, or an electronic ID plate and OEM data, can be accessed at any time - device monitoring and diagnosis is made easy. For an unlimited subscriber count the interface master provides the clock signal for simultaneously triggered actions. For an example, a typical RS422 link can support frame repetition rates of 10µs even with data words of up to 64 bits. Data transmission is fully CRC secured for the bidirectional command and register communication and for each single-cycle data channel separately, with an assignation of a start value ensuring channel identification by safety controls. With the BiSS-C-Interface the ASSP / ASiC manufacturer iC-Haus has established an open standard interface for individual automation solutions. On the basis of an OEM license available free of charge interface embedding is supported by IP modules such as VHDL code and an API library for software developers. More: Your contact person: |
Encoders for direct drives with new mounting solution: Sendix 5873
  |
Kübler developed an innovative solution for mounting the absolute singleturn encoders on gearless drives (direct drives). A Set button allowing a fast start-up and the open absolute BiSS interface - including an incremental SinCos track - are further highlights of these encoders.
More: Your contact person: |
Paguflex - flexible shaft coupling
 |
This flexible shaft coupling for connecting motor and encoder is a safe, uncomplicated and economical solution, especially where a large misalignment of the drive shaft has to be compensated for. More: Product details: Your contact person: |