* only npn/pnp!

Low-cost compact LCD counter, battery-powered (service life > 8 years), count inputs for mechanical contacts or AC/DC voltage pulses. All models have screw terminals ( 5 mm raster), high count speeds, customized versions possible.

Protection: IP 65 front side, Number of digits: 8, Reset: manual / electrical, Panel cut-out: DIN 48x24 mm, optional backlighting!

Simple

• Fast PNP or damped NPN,
  Control via separate inputs
• No programming required.

Functional

• Direct display of the total number of
  pulses
• Pressing the key displays the preset
  service value and its pre-signal
• Preset value output in form of a text on
  the display and on the transistor output
• Pre-signal for the service intervals in
  form of a text on the display
• Manual or electrical reset of the display
  or of the service intervals

Power supply: 10...30V DC, Protection: IP 65 front side, Number of digits: 7, Panel cut-out: DIN 48x24 mm

2 pulse counters, pulse counter and timer, pulse and frequency meter or 2 timers

* Totaliser, Position display and Tachometer
** Multifunction device with dual functions
*** separate Inputs for frequency and position, count

A re-design and new models expand the field of applications for these compact, powerful LED counters, tachometers and timers. 60 kHz count frequency makes it possible to use these products with encoders, even at high speeds.

Protection: IP 65 front side. Number of digits: 6, Reset: manual / electric, Panel cut-out: DIN 48x24 mm, Power supply: 10 ... 30 V DC

User-friendly

• Big keys
• Easy to programme

Universal

• Separate scaling for input A and B
• Simple display switching
• DC power supply
• Reset manual or electrical

Protection: IP 65 front side. Number of digits: 6, Reset: manual / electric. Panel cut-out: DIN 48x24 mm, Power supply: 10 ... 30 V DC

2 pulse counters, pulse counter and timer, pulse and frequency counter or 2 timers

* Totaliser, Position display and Tachometer
** Multifunction device with dual functions
*** Separate Inputs for frequency and position

A re-design and new models expand the field of applications for these compact, powerful LED counters, tachometers and timers. 60 kHz count frequency makes it possible to use these products with encoders, even at high speeds.

Protection: IP 65 front side. Number of digits: 6, Reset: manual / electric, Panel cut-out: DIN 96x48 mm, Power supply: 10 ... 30 V DC or 90 ... 260 VAC

Number of digits: 7, Height of figures: 6 mm, Count mode: addiing, Reset: electrical, Panel cut-out: 32x19 mm, Count frequency: 10 kHz, Power supply: 4.75 ...60 V DC

Number of digits: 6, Height of figures: 5 mm, Count mode: adding, Reset: electrical, Panel cut-out: 32x19 mm, Count frequency: 100 Hz, Power supply: 4.5 ...28 V DC

Number of digits: 4/6/6, Height of figures: 6 mm, Count mode: add./add./add.-sub., Reset: electrical, Panel cut-out: 28x18 mm / 31x24 mm, Count frequency: 18 Hz/10 kHz/10 kHz, Power supply: 2.6 ...3.4 V DC (167,168) and with battery (166)

Number of digits: 8, Height of figures: 8 mm, Count mode: add./sub., Reset: electrical and manual , Panel cut-out: 47x21 mm, Count frequency: 10 kHz, Power supply: 2.4 ...3.2 V DC

SSI-clock frequency up to 1 MHz, master or slave mode. Position display in conjunction with absolute encoders with SSI interface up to 25 bit

Number of digits: 6
Presets: 2
Protection: IP 65 front side Power supply: 17 ... 30 VDC and 115 / 230 VAC
Outputs: Scaleable analogue output or 2 optocoupler with tracking preset or RS 232/485 interface.

Fast count input for our Limes system.
Display programmable: Speed, rotational speed, count and timer functions.

Number of digits: 6
Dimensions: DIN 96x48 mm
Outputs: Scaleable analogue output or 2 optocoupler with tracking preset or RS232/485 interface
Reset: electrical
Power supply: 16 ... 35 VDC or 115/230 VAC
Count frequency: 25 kHz (100 kHz for count)
Protection: IP 65 front side