New magnetic ring RI20 for the incremental measuring system Limes LI20.

• > 3600 pulses per revolution.
• through hollow shaft up to 30 mm, minimal installation depth of only 16 mm.
• simple installation, high protection rating IP67.
• non-contact scanning, high shock and vibration resistance.

More:
[Data sheet]
[Online Data sheet]
[Press release]

Your contact person: Arnold Hettich

The new absolute encoder family has been expanded.

Singleturn, Multiturn with shaft or hollow shaft 16 Bit Singleturn, 12 Bit Multiturn.

• Rugged, proven Sendix design.
• Many additional functions, high speed.

Fast simple start-up thanks to:

• ergonomic bus cover.
• M12 connectors.
• diagnostic LED.
• parameters that can be programmed over the bus.

Sendix absolute can also be supplied with a CANopen or Profibus interface.

More:
[Data sheet Singleturn]
[Data sheet Multiturn]
[Online Data sheet]

Your contact person: Arnold Hettich

New measuring system LI20/LI50 - compact solution for linear applications

• Non-contact scanning: high shock and vibration resistance.
• Optimal protection due to metal housing.
• Status LED for index signal and error.

More:
[Data sheet LI20/B1]
[Data sheet LI50/B2]
[Online Data sheet LI20/B1]
[Online Data sheet LI50/B2]
[Press release]

Your contact person: Arnold Hettich

All-round protection thanks to Safety-Lockplus™ and Sensor-Protect™ - technology New magnetic singleturn encoder

Safety-Lockplus™:

IP69k protection on the flange side, robust bearing assemblies with interlocking bearings, mechanically protected shaft seal.

Sensor-Protect™:

Fully encapsulated electronics, separate mechanical bearing assembly.

• Output 4 ... 20 mA, 0 ... 10V, or CANopen.
• Wide range of temperature -40 °C .... +85 °C.
• Resolution 12 Bit (4 ... 20 mA, 0 ... 10 V).
• Resolution 14 Bit (CANopen).

More:
[Data sheet Analog]
[Data sheet CANopen]
[Online Data sheet Analog]
[Online Data sheet CANopen]
[Press release]

Your contact person: Arnold Hettich

• Extended resolution: Sendix incremental 5000 and 5020 with pulse rates up to 5000.
• Adapter/isolation inserts for hollow shaft encoders.

More:
[Data sheet with Accessories]

Your contact person: Arnold Hettich

Mounting solution for encoders with large hollow shaft.

• Stator coupling.
• Tether arm.
• Tether arm short.

More:
[Data sheet]

Your contact person: Arnold Hettich

Family expanded with Fieldbus version

and

Singleturn, Multiturn – with solid or hollow shaft, 16 Bit singleturn, 12 Bit multiturn

• Up-to-the-minute Fieldbus profiles
• Rugged, proven Sendix design
• Many additional functions, high speed
• Fast simple start-up thanks to:
  • ergonomic bus cover
  • M12 connectors
  • diagnostic LED
  • parameters that can be programmed
  • over the bus

All-round protection thanks to Safety-Lockplus™ and Sensor-Protect™ technology

Safety-Lockplus™:
IP69k protection on the flange side, robust bearing assemblies with interlocking bearings, mechanically protected shaft seal

Sensor-Protect™:
Fully encapsulated electronics,
separate mechanical bearing assembly

The compact solution for rotary applications

New magnetic ring RI20 for the incremental measuring system LIMES L1

• > 1400 pulses per revolution
• through hollow shaft up to 30 mm, minimal installation depth of only 16 mm
• simple installation, high protection rating IP67
• non-contact scanning, high shockand vibration resistance

Absolute Single- and Multiturn encoder with Profibus-DP

• Reliable:
  "Safety-Lock TM design",Resistant die cast housing and protection up to IP 67, Wide temperature range (-40°C ... +80 °C)
• Fast:
  Fast data availability with reduced loading on the bus and controller
• Versatile:
  Latest field bus performance for the applications

• Rugged:
  Solid die-cast housing with up to IP 69K protection. Resistant against humidity and condensation.
• Compact:
  Overall diameter of only 36 mm, hollow shaft up to 10 mm, solid shaft up to 6.35 mm
• Versatile:
  Interface: 9-Bit SSI, 4 ... 20 mA, 0 ... 10 V

• Rugged:
  High shock and vibration resistance, thanks to non-contact technology, Solid housing with up to IP 67 protection.
• Compact:
  Large hollow shaft with max. 45 mm overall diameter
• Simple installation:
  Easy fixing of the magnetic ring and the sensor head, Distance of sensor head to magnetic ring from 0.1 to 1.0 mm

Absolute Single- and Multiturn encoder with Ehtercat

• Up-to-the minute fieldbus performance in the application CAN over Ethernet (CoE)
• Simple installation using M12 plug connectors. Bus terminal cover with 3 x M12 connectors
• Position, speed, acceleration or working area – the user decides, which information will be available in real-time PDO mapping in the memory
• Fast, error-free start-up – no need to set switches. All parameters can be programmed via the bus
• Genuine time-synchronous position detection
• Distributed clock for real-time position detection
• Fast data availability with reduced loading on the bus and controller
• Intelligent functions including communication of speed, acceleration or leaving a working area

The new generation of absolute single- and multiturn encoders

• Reliable:
  "Safety-Lock™ design", Resistant die cast housing and protection up to IP 67. Wide temperature range (-40°C ... +85°C)
• Fast:
  Fast data availability with reduced loading on the bus and controller
• Versatile:
  Latest fieldbus performance for the applications. With Sin/Cos or incremental track

Universal industrial encoder family on a new technology platform - with shaft or hollow shaft

• Compact:
  housing ø 50 mm, from 37.5 mm depth. Flange compatible with all 58 mm standard flanges.
• Flexible:
  many connection possibilities, incl. M12 connector
• Tough:
  new sturdy bearing construction (Safety lock™ Design)

Our ATEX encoders now also carry approval for Dust

• One device for all cases:
  Zone 1, 2 and 21, 22: Ex II 2G EEx d II C T6 and Ex II 2D IP6x T85°C
• Compact:
  Through hollow shaft offers reduced overall installation depth of only 94mm.
• Safe:
  Short-circuit proof outputs, reverse polarity and over-voltage protection

• Compact and Rugged:
  Minimal installation depth, high shock and vibration values
• Versatile and Problem-free:
  Many options, fully programmable
• Dynamic:
  Fast and safe, certificated connection technology, plug & play cable assemblies

For separation of bearing load and sensor component, shaft loading up to 600 N possible

By separating the bearing load and the sensor technology the encoder is well-protected even in harsh application conditions. This is for example, a particular advantage with belts that can be tensioned differently such as occurs in lift construction (shaft copying).

Simple upgrade, no mechanical adaptation, long service life, durable mounting

• Compatible: Compatible dimensions to all encoders with a flange diameter of 58mm
• Simple: Fast and easy to upgrade and retrofit, Increases the maximum bearing load by a number of times
• Flexible: Versions for retrofitting to solid shaft encoders for very small installation depth.

The new price entry level class for absolute multiturn technology.

• Economical standard version of our multiturn family
• Compact throughout: through hollow shaft, installation depth only 40.5 mm
• Dynamic: non-contact multiturn stage

• Housing resistant against coolants and other environmental influences
• Small, only 36 mm diameter
• Hollow Shaft, up to 8 mm diameter

• Rugged: incremental encoder with balanced stainless-steel clamping rings, special bearing-shaft connection
• Safety lock ™ Design increases stability and vibration resistance
• Versatile, due to compact size
• Optional isolating inserts avoid damage from shaft currents, e.g. with AC vector motors